Jacuzzi Spa Bath

Metrax Heated Spa Bath Blower 800 Watt Non Switched

Metrax Heated Spa Bath Blower 800 Watt Non Switched

Metrax Heated Spa Bath Blower 800 Watt Non Switched
Metrax Heated Spa Bath Blower - 800 Watt - Non Switched. Product Overview: This superb 800watt Spa bath air blower From Metrax is rated IPX5 and is suitable for powering spa systems with up to 36 nozzles. It can also be used for Most air track baths such as those supplied by ourselves, PH pools, and Airbath. The blower is very quiet compared to other blowers we have used in the past and comes as standard with a powerful 300watt heating element with a thermal cutout which switches the element off once the blower has reached operating temperature.

Blower Features: Extremely robust housing / swing buffer bearing. Security aspects: All of our blowers are equipped with a thermal fuse (105 °C).

The thermal fuse is seated directly at the motor winding and prevents the overheating of the blower. Also in the area of the blocking of the motor, this thermal fuse prevents the overheating of the blower. This requirement was designed and implemented in accordance with the DIN EN standard. 300W heater (optional): Only 5 seconds after switch on, the integrated heating of the fan creates warm air, which is channeled into the whirlpool bath.

With this technique, an unpleasant effect of colds is avoided when bubbles touch the skin. Pneumatic switch (optional): Many of our customers want to turn on and off the hot tub blower without interfering with the existing electronics of the Spa. Our pneumatic switch or pneumatic button is attached to the edge of the tub. By this you can easily turn the blower on and off.

Ozone lamp (optional): Ozone is generated by this lamp. Because Ozone has an additional oxygen molecule compared to ordinary air, the air that is generated by the blower is of higher oxygen concentration. This effect sterilizes water and ensures more hygiene during use. Also: The nozzles can be cleaned with the Ozone while the tub is empty. 3-stage Electronic Control (optional): A pneumatic switch or button is attached to the hot tub.

With this, the amount of air produced by the fan can be regulated in 3 stages. With the first hit onto the button, the fan switches on at the lowest level, at the second and third it increases its intensity.

With a fourth hit, you can turn off the hot tub blower. Blower Specifications: Power: 800 W Heater: 300 W Max Pressure: 140mbar Air flow: 820 l/min Air flow ø 10mm: 362 l/min The blower is un-switched and is designed to be operated through a separate control box (not supplied). The outlet spigot is suitable for connection to 1 inch/32mm pipework. Total Power requirement 1100 watts Sound level of 66db. Air temperature up to 70°c. Please Note: The image/s representing the product/s you are purchasing may appear aesthetically slightly different from the actual product. This may be due to necessary upgrades or minor changes for that model. If you have any doubts about what you are ordering, please give us a call on: 01633 244555. This item is in the category "Home, Furniture & DIY\Bath\Showers, Baths & Parts\Indoor Whirlpools". The seller is "pegasus_whirlpool" and is located in this country: GB. This item can be shipped to United Kingdom.
  • Type: Indoor Spa Bath
  • MPN: MG/METRAX/90613
  • Brand: MG

Metrax Heated Spa Bath Blower 800 Watt Non Switched