Pegasus 4 Function Control Box Including Flatpad Control

Pegasus 4 Function Electronic Control Box Including Flatpad Control. The 4 Function Electronic Control Box is supplied with a 4 Function Flatpad Control, this provides capability of. Pump On/Off - Single Speed.

Blower On/Off - Five Speed Blower. Light On/Off - White and 10 Individually selected colours + Mood Lighting. The 4 Function Electronic Control Box is supplied with 2 Sensors. Water Level Sensor - This Sensor is used to ensure the Pump cannot be turned on without the required amount of water in the bath, this provides Pump Protection by ensuring the pump cannot be'Dry-run'.

The Water Level Sensor is also used to notify the Blower when the bath has emptied of water, the Blower then proceeds to Blow Dry the pipework. The Sensor is attached to the outside of the bath just above the highest jet by using a small amount of silicone. Disinfection Sensor - This Sensor is used to ensure there is an adequate amount of disinfection in the disinfection bottle before use. It is attached to the outside of the bottle at the lowest point, this senses when there is not enough fluid in the bottle and its requires re-filling. Control Pad Thickness: 1.5mm.

Hole/Slot Size Required: 18mm x 4mm. This Control box is ran on 230/240V.

Listing and template services provided by inkFrog. This item is in the category "Home, Furniture & DIY\Bath\Showers, Baths & Parts\Indoor Whirlpools". The seller is "whirlpoolbath_spares" and is located in this country: GB.

This item can be shipped to United Kingdom.

Brand: Pegasus
MPN: PV/FLATPAD/4FDISINFECT
Room: Bathroom
Type: Indoor Spa Bath