Whirlpool Bath Japanese Deep Soak Fibreglass/Supercast 1400 X 1000 x 600 deep
This Deep soak Whirlpool Bath/Hot Tub is a brand new Fibreglass 1400 x 1000 tub and is 600mm deep. It can be used not only in a bathroom but it could be set in a decking situation outside under a veranda/pergola close to the house plumbing and used as an alternative to a hot tub only filled when required so saving on expensive electricity bills. It has a 16 Jet Airspa complete with multicolour mood changing light, with an extra supercast layer added which increases strength and also enhances heat retention.
These baths are manufactured in the UK in our own Fibreglass moulding company, the whirlpool system has then been fitted by our in house spa technicians. Please note that the motor on these baths does protrude approximately 90-100 mm out from the circumference of the bath this is unavoidable as the side are quite vertical, they are designed to be an inset bath so a frame work would need to be constructed around the bath and then finished i. 1 x chromotherapy light fitted central at waste end.
Controls: on/off, light on/of switch. Other jet configurations including back/foot jets can be discussed. All baths are made by us in the UK with all fittings sourced from UK suppliers.
Step into a deep soak bath and immerse yourself and relax. This tub will retain the water temperature longer than a conventional tub with its robust composite structure with a fully encapsulated baseboard for extra strength. These baths require no more effort to fit than a normal bath. Built Hampshire UK the bath is made to the highest standard using only sanitary grade materials and will not leave the warehouse until the tub has been thoroughly inspected and if fitted with a whirlpool/spa system will undergo a rigorous testing routine prior to dispatch. Tap holes are not drilled out.
Waste position is pre moulded so cannot be changed. Overflow hole is drilled out directly above the waste. 1400mm x 1000mm overall perimeter of bath (without spa system fitted). Spa pump protrudes 90mm outside of the perimeter of bath and can be fitted to whatever side you want.
These baths are normally fitted as inset baths and don't come with panels. 660mm Minimal height (includes 5 pre moulded unremovable adjustable feet blocks). Adjustable feet supplied of which bolts into the feet blocks have a 40mm adjustable range length if needed. In summery - Variable Height Adjustable Range 660mm - 700mm. 50mm topside ledge on 3 sides, with a 100mm topside ledge at the tap / waste / overflow end (see image).